Spring RestTemplate使用方法总结

1. 引入依赖

首先，需要确认项目中是否直接或者间接引入过spring-web依赖，如果没有引入过，需要在pom.xml中添加以下代码引入依赖：

<dependency>
 <groupId>org.springframework</groupId>
 <artifactId>spring-web</artifactId>
 <version>4.3.24.RELEASE</version>
</dependency>

2. 发送GET请求

使用RestTemplate发送GET请求主要有getForObject()和getForEntity()2个方法，每个方法分别提供了3种不同的重载。

2.1 使用getForObject发送GET请求(无参数)

使用getForObject()实现：

RestTemplate restTemplate = new RestTemplate();
String url = "https://www.example.com/getCurrentEnv";
String response = restTemplate.getForObject(url, String.class);
System.out.println(response);

假设以上接口返回的报文为：

{
 "serverAddress": "www.example.dev.com",
 "env": "dev"
}

也可以直接解析为自定义的类型：

import lombok.Getter;
import lombok.Setter;
@Getter
@Setter
public class EnvInfo {
 private String serverAddress;
 private String env;
}

RestTemplate restTemplate = new RestTemplate();
String url = "https://www.example.com/getCurrentEnv";
EnvInfo response = restTemplate.getForObject(url, EnvInfo.class);
System.out.println(JSON.toJSONString(response));

2.2 使用getForEntity发送GET请求(无参数)

也可以使用getForEntity()实现和2.1同样的功能，代码如下所示：

RestTemplate restTemplate = new RestTemplate();
String url = "https://www.example.com/getCurrentEnv";
ResponseEntity<EnvInfo> responseEntity = restTemplate.getForEntity(url, EnvInfo.class);
if (responseEntity.getStatusCode() == HttpStatus.OK) {
 EnvInfo response = responseEntity.getBody();
 System.out.println(JSON.toJSONString(response));
}

2.3 使用getForObject发送GET请求(带参数)

第一种方法是直接在url上拼接上参数，如下所示：

RestTemplate restTemplate = new RestTemplate();
String url = "https://www.example.com/getDataList?pageIndex=1&pageSize=20";
EnvInfo response = restTemplate.getForObject(url, EnvInfo.class);
System.out.println(JSON.toJSONString(response));

第二种方法是使用占位符添加参数，如下所示：

RestTemplate restTemplate = new RestTemplate();
String url = "https://www.example.com/getDataList?pageIndex={1}&pageSize={2}";
EnvInfo response = restTemplate.getForObject(url, EnvInfo.class, 1, 20);
System.out.println(JSON.toJSONString(response));

以上代码也可以替换为：

RestTemplate restTemplate = new RestTemplate();
String url = "https://www.example.com/getDataList?pageIndex={pageIndex}&pageSize={pageSize}";
Map<String, String> uriVariables = new HashMap<>();
uriVariables.put("pageIndex", "1");
uriVariables.put("pageSize", "20");
EnvInfo response = restTemplate.getForObject(url, EnvInfo.class, uriVariables);
System.out.println(JSON.toJSONString(response));

注意事项：

uriVariables中的key必须和url中的占位符名称一致，否则会抛出异常：

java.lang.IllegalArgumentException: Map has no value for 'pageIndex'

第三种方法是使用UriComponentsBuilder添加参数，该种方法相比于前两种方法更加灵活，可以实现动态添加参数，代码如下所示：

RestTemplate restTemplate = new RestTemplate();
String httpUrl = "https://www.example.com/getDataList";
UriComponentsBuilder uriComponentsBuilder = UriComponentsBuilder.fromHttpUrl(httpUrl);
uriComponentsBuilder.queryParam("pageIndex", 1);
uriComponentsBuilder.queryParam("pageSize", 20);
String url = uriComponentsBuilder.toUriString();
EnvInfo response = restTemplate.getForObject(url, EnvInfo.class);
System.out.println(JSON.toJSONString(response));

2.4 使用getForEntity发送GET请求(带参数)

也可以使用getForEntity()实现和2.3同样的功能，代码如下所示：

RestTemplate restTemplate = new RestTemplate();
String httpUrl = "https://www.example.com/getDataList";
UriComponentsBuilder uriComponentsBuilder = UriComponentsBuilder.fromHttpUrl(httpUrl);
uriComponentsBuilder.queryParam("pageIndex", 1);
uriComponentsBuilder.queryParam("pageSize", 20);
String url = uriComponentsBuilder.toUriString();
ResponseEntity<EnvInfo> responseEntity = restTemplate.getForEntity(url, EnvInfo.class);
if (responseEntity.getStatusCode() == HttpStatus.OK) {
 EnvInfo response = responseEntity.getBody();
 System.out.println(JSON.toJSONString(response));
}

2.5 getForObject与getForEntity的区别

getForEntity()与getForObject()相比，返回值用了ResponseEntity进行封装，可以多获取到以下2种信息：

  1. HTTP状态码
  2. Response Headers

代码示例：

RestTemplate restTemplate = new RestTemplate();
String httpUrl = "https://www.example.com/getDataList";
UriComponentsBuilder uriComponentsBuilder = UriComponentsBuilder.fromHttpUrl(httpUrl);
uriComponentsBuilder.queryParam("pageIndex", 1);
uriComponentsBuilder.queryParam("pageSize", 20);
String url = uriComponentsBuilder.toUriString();
ResponseEntity<EnvInfo> responseEntity = restTemplate.getForEntity(url, EnvInfo.class);
System.out.println("statusCode: " + responseEntity.getStatusCode().toString());
System.out.println("statusCodeValue: " + responseEntity.getStatusCodeValue());
responseEntity.getHeaders().forEach((key, values) -> {
 System.out.println(key + ": " + values);
});

输出结果：

statusCode: 200
statusCodeValue: 200
Server: [openresty]
Date: [Thu, 10 Apr 2025 05:39:02 GMT]
Content-Type: [application/json]
Transfer-Encoding: [chunked]
Connection: [keep-alive]

其中Response Headers输出部分和Chrome浏览器Network中的Response Headers是一致的：

2.6 发送GET请求(带参数及请求头)

一般情况下，请求第三方接口都需要签名、时间戳等请求头，但getForObject()和getForEntity()都不支持，

此时需要使用exchange()方法，代码如下所示：

RestTemplate restTemplate = new RestTemplate();
String httpUrl = "https://www.example.com/getDataList";
UriComponentsBuilder uriComponentsBuilder = UriComponentsBuilder.fromHttpUrl(httpUrl);
uriComponentsBuilder.queryParam("pageIndex", 1);
uriComponentsBuilder.queryParam("pageSize", 20);
HttpHeaders headers = new HttpHeaders();
headers.set("signature", "3045022100875efcef9eb54626bb0168a6baa7c61265d0001d49243f");
headers.set("timestamp", String.valueOf(System.currentTimeMillis()));
String url = uriComponentsBuilder.toUriString();
ResponseEntity<EnvInfo> responseEntity = restTemplate.exchange(url,
 HttpMethod.GET,
 new HttpEntity<>(headers),
 EnvInfo.class);
if (responseEntity.getStatusCode() == HttpStatus.OK) {
 EnvInfo response = responseEntity.getBody();
 System.out.println(JSON.toJSONString(response));
}

3. 发送POST请求

使用RestTemplate发送POST请求主要有postForObject()和postForEntity()2个方法，每个方法分别提供了3种不同的重载。

3.1 发送POST请求(带参数、json方式)

使用postForObject()实现：

RestTemplate restTemplate = new RestTemplate();
HttpHeaders headers = new HttpHeaders();
headers.setContentType(MediaType.APPLICATION_JSON_UTF8);
LoginParams loginParams = new LoginParams();
loginParams.setUsername("zhangsan");
loginParams.setPassword("123456");
HttpEntity<LoginParams> request = new HttpEntity<>(loginParams, headers);
String url = "https://www.example.com/login";
String response = restTemplate.postForObject(url, request, String.class);
System.out.println(response);

LoginParams的定义如下所示：

import lombok.Getter;
import lombok.Setter;
@Getter
@Setter
public class LoginParams {
 private String username;
 private String password;
}

假设以上接口返回的报文为：

{
 "code": 200,
 "expire": "2025-04-11 14:42:22",
 "token": "eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJleHAiOjE3NDQzNTM3NDIsImlkZW50aXR5"
}

也可以直接解析为自定义的类型：

import lombok.Getter;
import lombok.Setter;
@Getter
@Setter
public class LoginResponse {
 private Integer code;
 private String expire;
 private String token;
}

RestTemplate restTemplate = new RestTemplate();
HttpHeaders headers = new HttpHeaders();
headers.setContentType(MediaType.APPLICATION_JSON_UTF8);
LoginParams loginParams = new LoginParams();
loginParams.setUsername("zhangsan");
loginParams.setPassword("123456");
HttpEntity<LoginParams> request = new HttpEntity<>(loginParams, headers);
String url = "https://www.example.com/login";
LoginResponse response = restTemplate.postForObject(url, request, LoginResponse.class);
System.out.println(JSON.toJSONString(response));

也可以使用postForEntity()实现同样的功能，代码如下所示：

ResponseEntity<LoginResponse> responseEntity = restTemplate.postForEntity(url, request, LoginResponse.class);
if (responseEntity.getStatusCode() == HttpStatus.OK) {
 LoginResponse response = responseEntity.getBody();
 System.out.println(JSON.toJSONString(response));
}

3.2 发送POST请求(带参数、form表单方式)

使用postForObject()实现：

RestTemplate restTemplate = new RestTemplate();
HttpHeaders headers = new HttpHeaders();
headers.setContentType(MediaType.APPLICATION_FORM_URLENCODED);
MultiValueMap<String, String> map = new LinkedMultiValueMap<>();
map.add("username", "zhangsan");
map.add("password", "123456");
HttpEntity<MultiValueMap<String, String>> request = new HttpEntity<>(map, headers);
String url = "https://www.example.com/login";
LoginResponse response = restTemplate.postForObject(url, request, LoginResponse.class);
System.out.println(JSON.toJSONString(response));

也可以使用postForEntity()实现同样的功能，代码如下所示：

ResponseEntity<LoginResponse> responseEntity = restTemplate.postForEntity(url, request, LoginResponse.class);
if (responseEntity.getStatusCode() == HttpStatus.OK) {
 LoginResponse response = responseEntity.getBody();
 System.out.println(JSON.toJSONString(response));
}

3.3 postForObject与postForEntity的区别

postForObject()与postForEntity()的区别，与getForEntity()与getForObject()的区别一样，

返回值用了ResponseEntity进行封装。

4. 超时时间设置

如果需要自定义HTTP请求的连接超时时间和数据传输超时时间，代码如下所示：

import org.springframework.beans.factory.annotation.Value;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.http.client.SimpleClientHttpRequestFactory;
import org.springframework.web.client.RestTemplate;
@Configuration
public class RestTemplateConfig {
 @Value("${restTemplate.connectTimeout:5000}")
 private int connectTimeout;
 @Value("${restTemplate.readTimeout:10000}")
 private int readTimeout;
 @Bean
 public RestTemplate restTemplate() {
 SimpleClientHttpRequestFactory simpleClientHttpRequestFactory = new SimpleClientHttpRequestFactory();
 simpleClientHttpRequestFactory.setConnectTimeout(connectTimeout);
 simpleClientHttpRequestFactory.setReadTimeout(readTimeout);
 return new RestTemplate(simpleClientHttpRequestFactory);
 }
}

文章持续更新，欢迎关注微信公众号「申城异乡人」第一时间阅读！

作者:申城异乡人原文地址:https://www.cnblogs.com/zwwhnly/p/18820159
0
分享 2025-04-11

%s 个评论

要回复文章请先登录或注册

关于我们 • 赞助与捐赠 • 站点地图 • 联系我们 • 网站合作 • 免责声明
友情链接： 乐读文化 • 开发者 • MySQL Workbench • 大牛教程 • 交换链接
本站为个人网站，部分内容来自于互联网，版权归原作者所有。如本站内容有侵权，敬请来信联系我们，我们将及时删除清理。
© 2025 大牛教程